PR..CE
Rod end
COUPLING:
Steel/Steel requiring maintenance.
Manufactured following DIN 24338 – ISO6982 – ISO8132, within mounted GE..LO (ISO12240-1), held by circlips. Hexagonal screws (DIN 912 class 12.9) allowing tightening on rod thanks to vertical cut on thread. Lubrication grease nipple assembled available from Ø20.
MATERIAL:
Forged C45 up to diameter 100mm, from measure 110 mm it is made in EN-GJS-400-15.
Available left threaded (code PL..CE), surface treatment to increase resistance to corrosion as: zinc galvanize, phosphate plating and nickel plating.
Available with 2RS protective seal.
APPLICATION FIELDS:
Rod end for DIN24338 hydraulic cylinders, CETOP RP 58H, DIN 24333-24336, ISO6020/1-6022.
Note: PR70CE Out of standard
BALL JOINT ENDS
• DIN 24338 / ISO 6982
• CETOP STANDARDS
• WITH GREASE NIPPLE
• COUPLING: STEEL/STEEL
• BALL JOINT MADE IN FORGED STEEL C45
TECHNICAL DATA
| ninjacolumn1 | ninjacolumn2 | ninjacolumn3 | ninjacolumn4 | ninjacolumn5 | ninjacolumn6 | ninjacolumn7 | ninjacolumn8 | ninjacolumn9 | ninjacolumn10 | ninjacolumn11 | ninjacolumn12 | ninjacolumn13 | ninjacolumn14 | ninjacolumn15 | ninjacolumn16 | ninjacolumn17 | ninjacolumn18 | ninjacolumn19 | ninjacolumn20 | ninjacolumn21 | ninjacolumn22 | ninjacolumn23 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TOLLERANZE TOLERANCES | FATTORI DI CARICO LOAD FACTORS | |||||||||||||||||||||||
| SIGLA CODE | d | S | I | LF | D1 | D2 | D3 | D4 | S1 | S2 | L | L1 | F | d mm | D mm | GIUOCO SNODO RADIALE RADIAL JOINT CLEARANCE | DINAMICO C DYNAMIC C | STATICO CO STATIC CO | ANGOLO DI OSCILLAZIONE ANGLE OF OSCILLATION | VITI DIN 912 SCREWS | COPPIA DI SERRAGGIO VITI TORQUE OF SCREWS | PESO WEIGHT | ||
| PR12CE | 12 | 12 | 38 | 17 | 32 | 32 | 16 | 15.5 | 11 | 15 | 54 | 14 | M12X1.25 | 0÷0.018 | 0÷-0.18 | 0.023÷0.068 | 24.5 | 10.8 | 4° | M5X16 | 6 | 0.10 | ||
| PR16CE | 16 | 16 | 44 | 19 | 40 | 40 | 21 | 20 | 13.8 | 15 | 64 | 20 | M14X1.5 | 0÷0.018 | 0÷-0.18 | 0.030÷0.082 | 36.5 | 17.6 | 4° | M6X14 | 10 | 0.21 | ||
| PR20CE | 20 | 20 | 52 | 23 | 47 | 47 | 25 | 25 | 17.8 | 18.7 | 75 | 22 | M16X1.5 | 0÷0.021 | 0÷-0.21 | 0.030÷0.082 | 48 | 30 | 4° | M8X20 | 25 | 0.35 | ||
| PR25CE | 25 | 25 | 65 | 29 | 59 | 54 | 30 | 30.5 | 21.9 | 19 | 96 | 27 | M20X1.5 | 0÷0.021 | 0÷-0.21 | 0.037÷0.100 | 78 | 48 | 4° | M8X20 | 25 | 0.62 | ||
| PR32CE | 32 | 32 | 80 | 37 | 71 | 66 | 38 | 38 | 27.5 | 22 | 118.5 | 32 | M27X2 | 0÷0.025 | 0÷-0.25 | 0.037÷0.100 | 114 | 67 | 4° | M10X25 | 49 | 1.17 | ||
| PR40CE | 40 | 40 | 97 | 46 | 90 | 80 | 47 | 46 | 33 | 27 | 146.1 | 41 | M33X2 | 0÷0.025 | 0÷-0.25 | 0.043÷0.120 | 204 | 100 | 4° | M10X25 | 49 | 2.15 | ||
| PR50CE | 50 | 50 | 120 | 57 | 109 | 96 | 58 | 57 | 41 | 32 | 179.6 | 50 | M42X2 | 0÷0.025 | 0÷-0.25 | 0.043÷0.120 | 310 | 156 | 4° | M12X35 | 86 | 4.40 | ||
| PR63CE | 63 | 63 | 140 | 64 | 132 | 114 | 70 | 71.5 | 53 | 38 | 211.6 | 62 | M48X2 | 0÷0.030 | 0÷-0.30 | 0.055÷0.142 | 430 | 255 | 4° | M16X40 | 210 | 7.60 | ||
| PR70CE | 70 | 70 | 160 | 81 | 157 | 135 | 80 | 79 | 57 | 42 | 245 | 70 | M56X2 | 0÷0.030 | 0÷-0.30 | 0.055÷0.142 | 540 | 315 | 4° | M16X40 | 210 | 10.10 | ||
| PR80CE | 80 | 80 | 180 | 86 | 169.3 | 148 | 90 | 91 | 67 | 48 | 270.6 | 78 | M64X3 | 0÷0.030 | 0÷-0.30 | 0.055÷0.142 | 395 | 400 | 4° | M20X50 | 410 | 14.50 | ||
| PR90CE | 90 | 90 | 195 | 914 | 185 | 160 | 100 | 99 | 71 | 52 | 296 | 85 | M72X3 | 0÷0.035 | 0÷-0.35 | 0.055÷0.142 | 750 | 490 | 4° | M20X60 | 410 | 17.50 | ||
| PR100CE | 100 | 100 | 210 | 96 | 211.4 | 178 | 110 | 113 | 86 | 62 | 322.7 | 98 | M80X3 | 0÷0.035 | 0÷-0.35 | 0.065÷0.165 | 1060 | 610 | 4° | M24X60 | 710 | 28.00 | ||
| PR110CEG | 110 | 110 | 235 | 106 | 235 | 190 | 125 | 124 | 88 | 62 | 364 | 105 | M90X3 | 0÷0.035 | 0÷-0.35 | 0.065÷0.165 | 1200 | 655 | 4° | M24X60 | 710 | 32.00 | ||
| PR125CEG | 125 | 125 | 260 | 113 | 265 | 200 | 135 | 138 | 103 | 72 | 405 | 120 | M100X3 | 0÷0.040 | 0÷-0.40 | 0.065÷0.165 | 1430 | 950 | 4° | M24X70 | 710 | 46.40 | ||
| PR160CEG | 160 | 160 | 310 | 126 | 326 | 250 | 165 | 177 | 130 | 82 | 488 | 150 | M125X4 | 0÷0.040 | 0÷-0.40 | 0.065÷0.192 | 2200 | 1370 | 4° | M24X80 | 710 | 81.00 | ||
| PR200CEG | 200 | 200 | 390 | 161 | 418 | 320 | 215 | 221 | 162 | 102 | 620 | 195 | M160X4 | 0÷0.046 | 0÷-0.46 | 0.065÷0.192 | 3650 | 2120 | 4° | M30X100 | 1500 | 174 | ||
| PR250CEG | 250 | 250 | 530 | 205 | 580 | 420 | 300 | 315 | 192 | 142 | 847 | 265 | M200X4 | 0÷0.046 | 0÷-0.46 | 0.065÷0.214 | 6400 | 3550 | 4° | M36X140 | 2450 | 425 | ||
